Best price guarantee
Best price guarantee* We will match or beat all other retailers
Free delivery
Free delivery on all products* When you spend £50 or more
Best price guarantee
Industry Experts since 1998 We have the level of knowledge you need
 
Guides
Share Facebook Twitter Pintrest Comment

Linking your Pico Remote to a Grafik Eye QS

Before you start, please ensure that you have a wireless enabled Grafik Eye QS Controller and a compatible Lutron Pico Remote.

Step 1: Check that the wireless mode of the Grafik Eye QS controller is “Enabled"

    1. Press and hold the top and bottom scene buttons on your Grafik Eye QS simultaneously for 3 seconds to enter programming mode

    2. Use the Master Buttons to highlight “Wireless Mode” and press the OK button to accept.

    3. Use the Master Buttons to highlight the “Enabled” wireless mode and press the OK button to accept.

    4. The info screen will display a confirming “Saved” message.

    5. Press and hold the top and bottom scene buttons on your Grafik Eye QS simultaneously for 3 seconds to exit programming mode. When successful the info screen will go to Scene

Grafik Eye Wireless Settings

 Step 2: Put the Pico into programming mode

  1. On the Pico wireless control, press and hold the top (on) and bottom (off) buttons simultaneously for 3 seconds. The info screen on the Grafik Eye QS controller will display the Pico wireless control options.

  2. Press the OK button on the Grafik Eye QS controller to select the desired operation type for the Pico wireless control.

 Lutron Pico Remote

Step 3: Assign the Pico wireless control

To assign the Pico wireless control as a zone controller:

  1. Use the Master Buttons on the Grafik Eye QS controller to select “Zone” and press the OK button to accept.

  2. Use the zone Raise/Lower buttons for a zone to select a desired preset level.

  3. Then press the zone raise and lower buttons simultaneously for 1 second, until the zone LEDs flash at the programmed preset level.

  4. Repeat for all zones you want to control with the Pico wireless control.

Zone Controls on Grafik Eye

OR

To assign the Pico wireless control as a scene controller:

  1. Use the Master buttons to select “Scene” and press the OK button to accept.

  2. Press and hold the top scene button on the Grafik Eye QS controller for 3 seconds, until the scene LEDs flash.

Lutron Grafik Eye Scene Controls

Step 4: Exit programming mode

  1. On the Pico wireless control, press and hold the top and bottom buttons for 3 seconds until the LEDs on the Grafik Eye QS controller stop flashing.

Lutron Pico Remote

 Please note that the wireless signal has a range of 9m (30ft) through standard construction and 18m (60ft) line of sight. This may be reduced depending on a number of factors, including thickness of walls.

Previous Article Next Article

Related products

Newsletter Subscription

Stay connected with Savi via our newsletter