RCM-070 7 Button RF Wireless Push Button Wall Plate
The Rako RMS800 is an in-line RF switch module for non-dimmable loads, capable of switching up to 800VA of non-dimmable loads including extractor fans, LEDs and non-dimmable flourescents.
As part of a wireless Rako control system, the RMS-800 can be controlled from any Rakom RF device, such as the RCM070 wall station. To program the module you can use either RASOFT PC software or a wireless RCM/RCP wall plate.
Thanks to its diminutive size the RMT800 is ideal for installation in a ceiling void or cupboard; This, and wireless control make it an excellent component for retrofit lighting control projects.
The RMS 800 stores the House, Room and Channel address in addition to sixteen preset scene levels in a non-volatile memory and can be fully integrated into wired Rako systems if required.
Like all items in the Rako range, the RMS800 is incredibly reliable and fuss-free to install, we frequently install these in our own projects and find them easy to install and program.
Check out our blog for more information on what Rako is and how to use it!
|Dimensions||138mm x 46mm x 40mm|
|Input Supply||230V AC +/-10% 50Hz|
|Housing||UL VO Material|
|Climate Range||Temperature +2°C to +40°C; Humidity +5% to 95% non condensing|
|Connections||3 Way screw terminals for mains power|
|Protection||Auto resetting over current protection; Auto Thermal shutdown; Voltage surge protection|
|Load Types||All non dimmable lighting loads e.g. Extractor Fans and water pumps|
|Standards||Emissions - EN61000-6-3 :2001; Immunity - EN61000-6-1 : 2001|
|Communication||Rakom coded FM radio, 433.9MHz|
|Memory||Flash memory (non volatile)|
13th May 2016
We're often asked what components are required for a Rako lighting control system. This isn't always easy to explain over the phone because each job should be treated individually, but this great video from Rako HQ is a fantastic starting point.
Complete your system
Savi store think you might like some of these products too
RMT500 500W In-Line RF Dimmer for Trailing Edge Dimmable Loads
THE RMT800 IS A REMOTE dimmer FOR CONTROLLING DIMMABLE LOADS IN YOUR WIRELESS RAKO SYSTEM, SUITABLE FOR CONTROLLING CIRCUITS WITH A LOAD OF UP TO 500W, you'll need an RMT500 per circuit.
RA-Bridge Wireless Programming Interface with Ethernet Link
The RA-Bridge can be used in any wireless Rako system to add smartphone/tablet control to your system. You only need one bridge per system.
RLED30-CV4 4 Channel Constant Voltage Dimming LED Driver
The RLED30-CV4 is a 4 channel in-line LED dimmer, ideally suited to use with RGBW fittings. When each colour is allocated a channel and a bridge is used, a colour wheel on the app can be used to pick a colour.
RCM-070 7 Button Keypad with Screwless Faceplate
This keypad is for use in Wireless Rako systems; allowing you to select 4 scenes, off and manually raise/lower the scene lighting levels. It includes a screwless faceplate for a clean, modern finish.