RCM-070 7 Button Keypad with Screwless Faceplate
Rako's RCM-100 is a ten button wireless control module, their wireless switches replace your conventional switch and communicates wirelessly with any Rako dimmers or modules in the house. The Rako wireless system is ideal for retrofit projects, no data or power cabling is necessary thanks to Rakom coded radio transmission.
The RCM100 is preconfigured for selecting seven scenes, off and master raise and lower. One of the best aspects of Rako's wall plate controllers is their versatility. They can be flush mounted into UK backboxes or surface mounted on a pattress, while a wide range of finishing plates provide options such as screwless or flat, brass or stainless steel.
These wireless control modules are battery powered but don't worry about replacing the batteries constantly - the batteries will last up to five years, when they need to be changed a blinking LED will warn you and changing the batteries is a quick and easy task.
We've installed countless numbers of these in our own jobs and even in our own homes, and to date we've had zero failures. The wireless Rako range is easy to install, versatile and above all - reliable!
Check out our blog for more information on what Rako is and how to use it!
|Back Box||UK Single standard back box (UPVC Version, not supplied)|
|Battery Life||Estimated 3 years based on 30 button presses a day|
|Input Supply||6V DC - 2 x 3V Lithium coin cell CR20 16|
|Communication||Rakom coded FM, 433.9MHz|
|Dimensions (Flush Mount)||50 x 50 x 12mm|
|Dimensions (Surface Mount)||92 x 92 x 14mm|
|Standards||Emissions: EN61000-6-3 : 2001, Immunity: EN61000-6-1 : 2001|
|Climate Range||Temperature +2°C to +40°C, Humidity +5% to 90% non condensing|
7th Jan 2019
The end of 2018 marks the end for Rako’s RAH07 remote, and the introduction of the RLC range
23rd Jan 2017
If you’re looking into a Rako or Lutron lighting control system, you may already be familiar with the term ‘Scene Lighting’. If you’ve never heard of the term, don’t worry! In this guide we’re going to cover the basics of Lighting Scenes.
13th May 2016
We're often asked what components are required for a Rako lighting control system. This isn't always easy to explain over the phone because each job should be treated individually, but this great video from Rako HQ is a fantastic starting point.
Complete your system
Savi store think you might like some of these products too
RMS800 800W In-Line RF Switch Module for Non-dimmable Loads
The RMS800 is a remote switching unit for controlling non-dimmable loads in your wireless Rako system, suitable for controlling circuits with a load of up to 800W.
RMT500 500W In-Line RF Dimmer for Trailing Edge Dimmable Loads
THE RMT800 IS A REMOTE dimmer FOR CONTROLLING DIMMABLE LOADS IN YOUR WIRELESS RAKO SYSTEM, SUITABLE FOR CONTROLLING CIRCUITS WITH A LOAD OF UP TO 500W, you'll need an RMT500 per circuit.
RA-Bridge Wireless Programming Interface with Ethernet Link
The RA-Bridge can be used in any wireless Rako system to add smartphone/tablet control to your system. You only need one bridge per system.
RLED30-CV4 4 Channel Constant Voltage Dimming LED Driver
The RLED30-CV4 is a 4 channel in-line LED dimmer, ideally suited to use with RGBW fittings. When each colour is allocated a channel and a bridge is used, a colour wheel on the app can be used to pick a colour.